mazda roadster nd5rc parts
mazda roadster (ND5RC) Strut Tower BAR Front Titanium

Strut Tower Bar Front Titanium

Made of Titanium.

Okuyama Strut tower bar connects both side of the strut upper bracket to strengthen front part of the body to let suspension work in the exact designed geometry. It also prevent body flex from cornering force. This result in better handling and stability.

pedal touch feels more responsive and performance of the brake pdeal to hydrylic cylinder improves when installing this master cylinder stopper equipped tower bar.

Strut Tower BAR Front Titanium
JPY 128,000円 (+tax)

mazda roadster (ND5RC) Strut Tower Bar Front  Type II Aluminum

Strut Tower Bar Front Type II Aluminum

Okuyama Strut tower bar connects both side of the strut upper bracket to strengthen front part of the body to let suspension work in the exact designed geometry. It also prevent body flex from cornering force. This result in better handling and stability.

pedal touch feels more responsive and performance of the brake pdeal to hydrylic cylinder improves when installing this master cylinder stopper equipped tower bar.

Strut Tower Bar Front Type II Aluminum (MCS)
JPY 36,000 (+tax)

mazda roadster (ND5RC) Strut Tower Bar Rear

Strut Tower Bar Rear Type D Aluminum

Okuyama Strut tower bar connects both side of the strut upper bracket to strengthen front part of the body to let suspension work in the exact designed geometry. It also prevent body flex from cornering force. This result in better handling and stability.

Strut Tower Bar Rear Type D Aluminum
JPY 29,000 (+tax)

mazda roadster (ND5RC) Frame Brace Front

Frame Brace Front

Frame Brace connects front suspension member and first front vehicle frame. Its add rigidity of front overhang for better steering response and stability during cornering.

・Okuyama Frame Brace uses 20x40(mm) oval shaft for better torsion rigidity.
・Made of steel. White color powder coated paint for scratch registants.

Frame Brace Front
JPY 24,000 (+tax)

Floor Sub Frame - Roadster ND5RC

Floor Sub Frame Set

his floor sub-frame connects center of the vehicle chasses. Floor sub-frame add rigidity of front and rear part of slide door to support center of chasses to prevent body flex. It improves driving comfort.
・High strengthen oval shaft is used for the piping to keep under the car clearance and rigidity.(20mm x 40mm )

Floor Sub Frame Set : JPY 54,000 (+tax)

Floor Sub Frame : JPY 45,000 (+tax)

roll bars for mazda roadster

Roll Bars

These products are designed for competition use mind.

Okuyama'scompetition technological know-how is feed backed for construction of these Cage.Competition use is on it's design concept.

 

4P, Dashboard Non through: JPY58,000(+tax)
6P, Dashboard Non through: 86,000(+tax)
8P, Dashboard Non through: 106,000(+tax)

mazda roadster (ND5RC) アンダーパネル

Under Panel

Under Panel rectifies air flow entering vehicle under engine room. By adding flat panel under the engine room, under panel eliminates air pile up that occurs at mid to high speed driving. Rectifying air flow under the car adds down force to the vehicle. Under Panel also increases air flow speed under the car that pulls the air from the engine room for better cooling efficiency.

Under Panel Set (Ver.1+2) : JPY 49,800

Under Panel Ver.1 : JPY 28,000

Under Panel Ver.2 : JPY 32,000

Flip Up Towing Hook Front - MAZDA ROADSTER

Flip Up Towing Hook Front

This made of steel swivel tow hook installed on manufacture original tow hook hole. It is a good dress-up item to add competitive look to your vehicle.

JPY 17,800円 (+tax)

Flip Up Towing Hook Front - MAZDA ROADSTER

Flip Up Towing Hook Rear

This made of steel swivel tow hook installed on manufacture original tow hook hole. It is a good dress-up item to add competitive look to your vehicle.

JPY 17,800円 (+tax)

マツダ ロードスター ND5RC  オイルキャッチタンク

0.6L Oil Catch Tank

CARBING oil catch tank interior design has oil separator. Longer inlet pipe improves oil-gas separation. Drain bolt for easy oil dumping is one of the standard features for CARBING oil catch tank. It is also equipped with oil level gage.

JPY 19,000 (+tax)

Passenger Plate - MAZDA ROADSTER

Passenger Plate

passenger plate is used to hold passenger with both foot in hard driving conditions.
Tuses 3mm thick aliminum. Easy installation with Velcro to your vehiclecarpet.

JPY : 9,800 (+tax)

High Pressure-Radiator Cap - MAZDA ROADSTER

High Pressure-Radiator Cap

Carbing Radiator cap increases coolant pressure in order to raise coolant boiling point efficiency. This is the must item for cooling system tuning. Relief pressure 127kpa.

JPY : 2,800 (+tax)

High Grip Shift Knob

High Grip Shift Knob

Aluminum or Duracon construction. Knurled surface finish to prevent slip Three color variations to best match your cockpit color Size 30mm Dia 85mm high Colors: Gold, Silver, Bronze, Aqua Blue, Black

JPY : 4,800 (+tax)

New Products ┃ Product Sarch : Search by Vehicles Search by Parts ┃ Company ┃ Blog

Terms and condition of Use ┃ Contact us