TOYOTA AQUA NHP10
Strut Tower Bar
Strut Tower Bar
Strut Tower Bar

Strut Tower Bar

Strut Tower Bar is a standard item for body reinforcement. It will stabilize suspension’s behavior by preventing body from twisting at cornering.

Steel

Aluminum

トヨタ アクア NHP10用 ロワームバー フロント

Lower Arm Bar Front

Lower arm bar is an undercarriage reinforcement part, which helps to get the best performance that suspensions can naturally offer.

Lower Arm Bar Front

トヨタ アクア NHP10用  フレームブレース センター

Frame Brace Center

Frame Brace connects front suspension member and first front vehicle frame. Its add rigidity of front overhang for better steering response and stability during cornering.

Frame Brace Center

トヨタ アクア NHP10用 フレームブレース リア

Frame Brace Rear

Weak point of the hatch-back type vehicle aft body has strengthened by installing this Rear Frame Brace.

Frame Brace Rear

トヨタ アクア NHP10用 フリップアップトーイングフック(フロント)

Flip Up Towing Hook Front

This made of steel swivel tow hook installed on manufacture original tow hook hole. This swivel tow hook can lock at 0degree/90degrees/180degrees position to prevent from scratching the body. You can drive your vehicle on the street with the hook locked at folded position.

Flip Up Towing Hook Front

トヨタ アクア NHP10用 トーイングフック リア

Towing Hook Rear

Both steel and aluminum line up Steel made products are competition regulation compatible(Japan regulation)

Towing Hook Rear

トヨタ アクア NHP10用 各種ロールバー

Rollbars

Okuyama Roll Cage has line of products with different number of points by adding angle and joints. Okuyama Roll Cage follows vehcle pillars that gives driver high visibility. High visibility sometimes makes driver forget about the presence of roll cage.

Rollbars

トヨタ アクア NHP10 パッセンジャープレート

Passenger Plate

passenger plate is used to hold passenger with both foot in hard driving conditions.
Tuses 3mm thick aliminum. Easy installation with Velcro to your vehiclecarpet.

Passenger Plate

トヨタ アクア NHP10 ハイプレッシャーラジエターキャップ

High Pressure-Radiator Cap

Carbing Radiator cap increases coolant pressure in order to raise coolant boiling point efficiency. This is the must item for cooling system tuning. Relief pressure 127kpa.

High Pressure-Radiator Cap

トヨタ アクア NHP10用 マッドフラップ フロント

Mud Flap Front

Mud Flap protects vehicle under chassis and body during non-paved street driving and dirt trial races.

Mud Flap Front

トヨタ アクア NHP10用 マッドフラップ リア

Mud Flap Rear

Mud Flap protects vehicle under chassis and body during non-paved street driving and dirt trial races.

Mud Flap Rear